Mini 635nM Red Laser Diode head with Crosshair Pattern used for aiming, alignment or other uses.. NOTE: DO NOT POINT INTO ANY EYE OR ANY SURFACE THAT CAN REFLECT INTO EYE Operating Voltage: DC 4.5V-5V
Operating Current: <40MA
Power: <3mW
Spread: ~22in. Sq. @ 24in.
Brass Body with 4in. Leads Dia: 9mm L: 22mm WT: .02
WARNING: This product can expose you to chemicals including Nickel which is known to the State of California to cause cancer and which is known to the State of California to cause birth defects and/or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Click to see Why is this here?
As of August 2018 the State of California has changed the requirements of the “Prop 65” law. We now must list on our website any possible chemicals the can cause cancer, birth defects or reproductive problem.
As an example:
ABS plastic contains styrene
PVC wire insulation can contain Di(2-ethylhexyl)phthalate (DEHP)
electrolytic capacitors can contain Ethylene glycol
Brass can contain Lead
flame retardant pc boards can contain Tetrabromobisphenol A (TBBPA)
Aluminum alloys can contain Chromium
To put it simply we are a small company and do not have the resources to test every single part, so we list every thing as hazardous. Please recycle all electronic parts responsibly and under no circumstance eat, drink or smoke these parts and wash your hands after touching!
I got tired of getting my expensive laser level out and setting it up just to hang a picture. I mounted one of these lasers and a bubble level on a block of plastic. I then drilled a hole through the plastic and inserted a 1/4-20 T-nut. It took a little bit of aligning, but now I can just attach it to a camera tripod, center the bubble level and hang pictures straight. Very handy!