Joystick, X-Y Analog control, Raspberry Pi, Arduino Compatible Sensor
Stock Number: 31061 MP
Detailed Description
Analog joystick for the Arduino and other microcontrollers. Contains two 10K potentiometers connected to the handle by lever for X-Y movement and when the handle is pressed in the centered position, a momentary switch “Z” is closed. The Potentiometers are wired as voltage dividers between Gnd. & Vcc. The lever is spring loaded to return to center position at rest. Typical connections are X and Y to the AD converter and the momentary Z switch to a digital pin. The Z switch has a 1K pull up resistor and is active low output. Can be used with 3.3V and 5V microcontrollers. This unit has three Dupont 3 pin male header connectors (.025sq X .1 spacing) for each function which makes connecting to the Arduino Sensor Shield a snap. Ideal for steering robots, games, panning cameras, and RC model control. With LED power indicator and four mounting holes L: 2-1/8" W: 1-3/4" H: 1-1/4" WT: .04
