Ethernet Shield with Micro SD Slot for Arduino
Compact LAN Shield using the Wiznet W5200 chip providing IP stack and capable of both TCP & UDP.
HX1198 10/100BASE-T Port Controller
Shield supplies up to 8 simultanious TCP/UDP socket connections.
SPI Port for communication to Arduino or other micro controllers.
UART and I2C Ports (Grove)
Can be server or client.
Micro SD card slot for file storage. Supports FAT16/32 2GB Max
Note: the W5200 & SD card share the SPI bus, only one can be active. You must disable the one you are not using.
RJ jack mounted Green & Yellow Status LEDs
Power: 3.3/5VDC from microcontroller
Communicates using the SPI interface (Arduino Pins D4 & D10-13)
D4: Selects SD Card
D10: Selects W5200 TCP/IP Controller
Digital I/O: Feed through:same as controller
Analog Input: Feed Through: same as controller
Supports up to 8 TCP/UDP Sockets
Compatible with the Duemilanove (168/328), Uno and Mega (1280/2560)
Supported by Arduino Ethernet library.
Supported by Arduino SD library
Ethernet Shield V2.0 Library:
https://github.com/Seeed-Studio/Ethernet_Shield_W5200 L: 2-3/4" W: 2-1/8" HT: 1-1/16” O/A WT: .1
