1-800-652-6733
Find us on Facebook View our Youtube Channel View us on Instagram Follow us on Twitter
Shopping Cart
0 Items
Total: $0.00
Shopping Cart | Login

ATXPower Breakout Board

ATXPower Breakout Board

36129-1.jpg  36129-large.jpg  360-3D.jpg    California Proposition 65 Warning
Stock No: 36129 BD
 Review Average:  
 Number of Reviews: 6
 View ReviewsReview this item
$6.95


Availibilty: In Stock   Units: 124
Quantity 



 Detailed Description
Breakout board for ATX type Power Supplies.
2x12 (24) pin socket mates to power supply motherboard connector.
Binding Posts for +5V, +3.3V, +12V, -12V & Ground.
Each Breakout is Fused with a Fast Blow 5A/250V fuse.
LED Power ON indicator.
Switch to Enable Power Supply.
L: 5-1/16" (128mm) W: 1-7/8" (48mm) H: 1-1/8" (30mm) WT: .15

California Proposition 65 Warning WARNING: This product can expose you to chemicals including Nickel which is known to the State of California to cause cancer and which is known to the State of California to cause birth defects and/or other reproductive harm. For more information, go to www.P65Warnings.ca.gov


 Product ReviewsClick here to review this item
Works as expected
At first I questioned the quality of the binding posts. I do not put much trust in the pressure contact of stranded wire on such a terminal nor do I trust the tighthess when wrapping solid wire around the stud. I soldered my leads to fork terminals and connected them to the posts. They tightened down and to this day I can not turn the wire on the studs.
- Daniel Ritter, PA
 
Crummy binding posts make this almost unusable!
I was disappointed after my initial inspection: the binding posts are completely worthless! Theyre some of the worst pieces of junk Ive seen! I wrapped a stripped length of 14AWG wire around the post, and it wouldnt hold. Tried the same thing with 26AWG, 24AWG, 22AWG, and 18AWG. 26-22AWG seemed fine, and 18AWG was iffy. The tests were all conducted on the same post +5V. Aside from the crummy posts, the board works well. Just dont wire it up with 14AWG or 18AWG wire! As I see it, there are two problems with this: If a wire becomes detached while in-use, that wire could short out to GND, and blow the fuse. Not a good situation, but not catastrophic. A bigger problem would be one where the disconnected wire bridges GND and the upstream side of the fuse, which could have disastrous results! My suggestion would be to re-spin the board: 1 Increase the boards length & width 2 Use a higher-quality binding post, with banana inputs. 3 Space the binding posts farther apart. 4 Increase the spacing between the GND posts & the hot-side of the fuse holders.
- Jeff Kerner, CA
 
Quality control from factory not great.
Plugged in ATX 1, hit swich led flashed on then off. Tried another, same dud. Ok I need a 5 ohm resister to ground from 5v line. Nope still dead. Finally broke out a magnifying glass. Pin 12 from molex clearly not soldered at top of thru hole and three other pins had shorts due to solder whiskers. Resoldered and scraped off whiskers, worked without load resistors. Examine your board before plugging in like I did.
- John, FL
 
Hooking the to older Compaq power supply and frist gen ATX.
Power Supply #166596-001 - I attached the 9 pin +5 volts aux to Pin 14 The white wire On/Stdby SO on the print circuit board and it came right up I did use the 10 ohm 10 watt on the 5 volt to ground line, I pulled that from the hard disk power connector. work like a charm. Power Supply #334112-001 - I attached the 9 pin +5 volts aux to Pin 14 The white wire On/Stdby SO on the print circuit board and it came right up I did use the 10 ohm 10 watt on the 5 volt to ground line, I pulled that from the hard disk power connector. work like a charm. the omly thing different was pin 7 it had a silver/ grey wire, on futher instection on the circuit board it was make Aux Gnd. It had no bearing on getting the supply working. I found on both supplies I didnt need to join pin 11 brown thick wire to pin 2 thin brown wire.Then I used one of the ATX Power Breakout boards, and pulled all my voltages.I did find the switch was inoperable. On the 9 pin to 14 pin I added an On/off switch so I could control the power supply. I also had a first generation ATX Compaq power supply and the Atx Board worked as advertised On the new ATX power supplies it would not work, But with a little fiddling with the power supply it would work.
- Edward Audet, NY
 
Simple Binding Posts, or, Yes, We Have No Banana
Note to others who may make the same mistake I did: The binding posts on this product are ONLY screw-down, NOT multi-way. In other words, despite the hole in the knobs, these do not accept banana plugs. That said, it looks like it should be easy enough to replace the existing posts with five-way posts if the studs are the right diameter.
- Brian, NC
 
Handy ATX Breakout
Very easy to use. A great idea.
WA
 

View below for the rest of the Email Specials.
24VDC  Lab Grade Peristaltic Pump
24VDC Lab Grade Peristaltic Pump
Item #: 36438 MI
$34.95
12VDC  4.7
12VDC 4.7" (120mm) Sq. X 1.5" (38mm) Box Fan- IMC
Item #: 37205 FN
$7.95
Flexable Neck Flashlight
Flexable Neck Flashlight
Item #: 35923 TL
$3.95
3 Way Heavy Duty Staple Gun
3 Way Heavy Duty Staple Gun
Item #: 35897 TL
$14.95
Pack of 4 pair - Red & Black Pair Micro Clip leads. USED
Pack of 4 pair - Red & Black Pair Micro Clip leads. USED
Item #: 34459 TE
$1.00
Pack of 10 - BNC Female Twist-On Cable Connector - RG59
Pack of 10 - BNC Female Twist-On Cable Connector - RG59
Item #: 25417 RC
$9.95
Right Angle
Right Angle "L" Connector 4 Wire - Round Pin
Item #: 34243 OP
$1.19
"T" Connector 4 Wire - Round Pin
Item #: 34244 OP
$1.39
Cross
Cross "+" Connector 4 Wire Round Pin
Item #: 34245 OP
$1.49
Step Motor with 300mm T8 Leadscrew for 3D Printer
Step Motor with 300mm T8 Leadscrew for 3D Printer
Item #: 35340 MI
$13.95 
sale $9.95 
12 Volt Adapter Power Supply, 5A, Ateck
12 Volt Adapter Power Supply, 5A, Ateck
Item #: 36374 PS
$10.95 
sale $9.95 
SPST-NO Metal Body 17mm  P/B Switch Green
SPST-NO Metal Body 17mm P/B Switch Green
Item #: 34828 SW
$1.95
Meter Shunt, 100A, 75mVDC, Buss Mount
Meter Shunt, 100A, 75mVDC, Buss Mount
Item #: 31078 ME
$5.95
USB Laptop LED Flexlights 1ea Red-Orange-Blue-Yellow & Black
USB Laptop LED Flexlights 1ea Red-Orange-Blue-Yellow & Black
Item #: 33692 CP
$3.95
Pack of 10 - 470 Ohm 1/4 Watt 5% Resistor
Pack of 10 - 470 Ohm 1/4 Watt 5% Resistor
Item #: 37064 RS
$0.95
Pack of 10 - 1K Ohm 1/4 Watt 5% Resistor
Pack of 10 - 1K Ohm 1/4 Watt 5% Resistor
Item #: 37066 RS
$0.95
Pack of 10 - 10K Ohm 1/4 Watt 5% Resistor
Pack of 10 - 10K Ohm 1/4 Watt 5% Resistor
Item #: 37068 RS
$0.95
Solder Station with LED Display,  ZD-929C
Solder Station with LED Display, ZD-929C
Item #: 15845 TL
$69.95
Soldering Iron Stand with Cleaning Pad
Soldering Iron Stand with Cleaning Pad
Item #: 31240 TL
$10.95
10 x Cartridge Fuse Blocks for 6 x 30mm & 1/4
10 x Cartridge Fuse Blocks for 6 x 30mm & 1/4" x 1-1/4" Fuses
Item #: 36853 FH
$10.95
Pack of 127 - Heat Shrink Tubing - Black - 7 Sizes
Pack of 127 - Heat Shrink Tubing - Black - 7 Sizes
Item #: 36931 HS
$3.95
Pack of 7 - 2.54mm (0.1
Pack of 7 - 2.54mm (0.1") Pitch PCB Terminal Blocks
Item #: 36882 TS
$4.95
Pack of 60 - 6 Colors Header Jumper Caps 2.54mm (0.1
Pack of 60 - 6 Colors Header Jumper Caps 2.54mm (0.1")
Item #: 36941 PL
$2.49
Pack of 7 - SMD Component to Thru Hole Breakout Board Set
Pack of 7 - SMD Component to Thru Hole Breakout Board Set
Item #: 31877 PB
$2.75
Power Cord 58
Power Cord 58" - 18/2 - IEC C7 Modified - Polarized
Item #: 36831 CB
$1.25
Pack of 5 - 5.08mm Mating Connectors 2, 3, 4, 5 & 6 Position
Pack of 5 - 5.08mm Mating Connectors 2, 3, 4, 5 & 6 Position
Item #: 36153 PL
$3.95
Foot Switch - General Purpose  -  SPDT - 250 VAC
Foot Switch - General Purpose - SPDT - 250 VAC
Item #: 35666 SW
$5.95
12VDC Submersible Water Pump
12VDC Submersible Water Pump
Item #: 33935 MD
$6.95
USB Digital Magnifying  Camera  50-500 X
USB Digital Magnifying Camera 50-500 X
Item #: 34724 TL
$19.95
12 Volt Adapter Power Supply, 3A
12 Volt Adapter Power Supply, 3A
Item #: 34445 PS
$6.95
5 Volt 3A DC Plug Power Supply. Regulated
5 Volt 3A DC Plug Power Supply. Regulated
Item #: 34291 PS
$3.95
5 Volt DC Plug Power Supply, 4A, Regulated
5 Volt DC Plug Power Supply, 4A, Regulated
Item #: 18520 PS
$5.95
E-Field & H-Field EMF Detector Hand Held Meter
E-Field & H-Field EMF Detector Hand Held Meter
Item #: 36073 TE
$29.95
Pistol Grip LASER Photo Tachometer
Pistol Grip LASER Photo Tachometer
Item #: 35589 TE
$19.95
Talking Digital Multimeter
Talking Digital Multimeter
Item #: 35042 ME
$39.95
ATXPower Breakout Board
ATXPower Breakout Board
Item #: 36129 BD
$6.95
DC Constant Current Electronic Load  Battery Tester
DC Constant Current Electronic Load Battery Tester
Item #: 35875 TE
$16.95
12VDC 1A Plug Power Supply
12VDC 1A Plug Power Supply
Item #: 34002 PS
$3.45
 
QUICK LINKS
Power Supplies
Benchtop Power Supplies
Solder Stations
12 Volt Power Supply
Solderless Breadboards
Digital Multimeters
Digital Panel Meters
DC Axial Brushless Fans
IEC Power Cords
 
Arduino Compatible Boards
Electronic Enclosures and Boxes
Stepper Motors and Drivers
24 Volt Power Supply
Adapter Power Supplies
Sub-Mini Toggle Switches
Mini Toggle Switches
Heat Shrink Tubing
Power Transformers
MY ACCOUNT
Login/Register
View Orders
Update Profile
View Cart
View Wish List
RESOURCES
Support Files
Information Articles
"How To" Videos
FREE Catalog
Email Signup
COMPANY INFO.
Ordering Info.
Shipping Info.
Privacy Statement
Contact Us
Directions to our Store
Find us on Facebook View our Youtube Channel View us on Instagram Follow us on Twitter

Copyright © 1997-2021 MPJA.com - All Rights Reserved
Send mail to MPJA.com with questions or comments about this web site.
Site Designed by NiteOwl Computing