3D Printer/CNC Leadscrew with Stepmotor
Stepper motor with Leadscrew designed for 3D printing or CNC machines.
NEMA 17/Size 42, 2 Phase 4 lead
Step Angle: 1.8deg
Holding Torque: 340mN/m (48oz/in)
Thread: T8X2- Single Start, 2mm Lead
Length: 300 mm long,
9in. 6 Pin/4 Conductor Pigtail Connector for Stepper
Brass Travler Nut, 15.5mm x 22mm Dia., Four M3 holes
Coupling: Aluminum, flexable helical cut with dual set screws in each end.
L: ~355mm O/A W: 42mm HT: 50mm O/A WT: .9