RJ-45 Water Resistant Net Connector
|Item Number: 34169 TT|
|Will not work with strain relief or snagless boots Cat 5 cables|
Water resistant bulkhead RJ-45 feedthrough (coupling) connector. Body mounts in a 20mm dia. hole. Install the sealing gland body on your RJ45 cable, plug into the bulkhead jack(s), slide gland down and thread onto the bulkhead. To finish the install, Tighten the sealing nut to compress rubber seal around cable.
Max Wall Thickness: 8.8mm
L: 4” (O/A) DIA: 1-1/8” WT: .1
|Had a spill on to one of my cables and even tho it got soaked, it was okay because I was using this connector! Definitely pick one up if there is water even remotely near your ports.|