Linear slide module generally used for the Z axis in engravers, CNC machines or 3D Printers.
NEMA 17 Motor, Steel glides with Stainless Mounting Plates.
Travel Length: ~5.5CM
Leadscrew: 8mm Dia. T8X2-2 Start, 4mm lead
Brass Anti-backlash Travler Nut
Ratio: 1 Rev = 4mm slide movement
1 Step= .02mm slide movment
Motor: NEMA 17/Size 42, 2 Phase 4 lead
Step Angle: 1.8deg.
Coil: 2.2VDC/1.7 Ohms/1.8mh
Base Plate: L:80mm W:42mm with 65mm Slots for M3 screws
Traver Plate: L:45mm W: 42mm With 30mm Slots for M3 screws
Motor Leads: 30 with 4 Pin XH2.54 connector L: 6-5/8 O/A H: 2-5/8 O/A T: 1-3/4 O/A WT: 1.7
WARNING: This product can expose you to chemicals including Nickel which is known to the State of California to cause cancer and which is known to the State of California to cause birth defects and/or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Click to see Why is this here?
As of August 2018 the State of California has changed the requirements of the Prop 65 law. We now must list on our website any possible chemicals the can cause cancer, birth defects or reproductive problem.
As an example:
ABS plastic contains styrene
PVC wire insulation can contain Di(2-ethylhexyl)phthalate (DEHP)
electrolytic capacitors can contain Ethylene glycol
Brass can contain Lead
flame retardant pc boards can contain Tetrabromobisphenol A (TBBPA)
Aluminum alloys can contain Chromium
To put it simply we are a small company and do not have the resources to test every single part, so we list every thing as hazardous. Please recycle all electronic parts responsibly and under no circumstance eat, drink or smoke these parts and wash your hands after touching!