Mini wireless Stepper Motor Controller for NEMA 17/23 motors.
Ideal for animation, displays , testing.
Power: DC 9-32 V (24V Nominal)
For proper motor operation:Input Voltage should be greater than rated Motor Voltage
Output: .1-3A for 2 phase/4Wire motor
Features: Remote 4 button Key FOB
Button A: Forward/Reverse
Button B: Decelerate
Button C: Start/Stop
Button D: Accelerate
NOTE: Accelerate/Decelerate are in 10 Fixed Steps
Motor will stop & “buzz” if you exceed motors max step rate
Lowest Speed 10kstep/sec (~47RPM with a 1.8deg stepper)
Increases ~10ksteps/button press(47/94/141/188/235 etc)
Remembers Last Setting with Power Off
Does Not Restart after Power Fail
Direction, Acc, Dec. can be changed by Remote when Stopped (Power On)
Will Assume new settings upon Start
Terminal Strip for Power & Output L: 3-3/4” W: 2-1/2” H: 1-3/8” WT: .5
WARNING: This product can expose you to chemicals including Nickel which is known to the State of California to cause cancer and which is known to the State of California to cause birth defects and/or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Click to see Why is this here?
As of August 2018 the State of California has changed the requirements of the “Prop 65” law. We now must list on our website any possible chemicals the can cause cancer, birth defects or reproductive problem.
As an example:
ABS plastic contains styrene
PVC wire insulation can contain Di(2-ethylhexyl)phthalate (DEHP)
electrolytic capacitors can contain Ethylene glycol
Brass can contain Lead
flame retardant pc boards can contain Tetrabromobisphenol A (TBBPA)
Aluminum alloys can contain Chromium
To put it simply we are a small company and do not have the resources to test every single part, so we list every thing as hazardous. Please recycle all electronic parts responsibly and under no circumstance eat, drink or smoke these parts and wash your hands after touching!