External sound card/DAC decoder module that plugs into USB port.
Uses PCM2704 a single-chip digital-to-analog conversion chip. It has two digital-to-analog conversion output channels and an integrated USB 1.1 standard interface controller.
Plug-N-Play, Requires No Drivers: Support system: WINXP/WIN7/WIN8, Apple MAC OS 9/OS X, Android 4.1 or higher system (need to support OTG models)
SPDIF 16-bit stereo or mono audio data with 48KHz, 44KHz and 32KHz sampling rates.
Power supply voltage: 5 V (USB port),
Distortion @ 10K ohm: THD+N: 0.006%
Dstortion @ 32 ohm: THD+N: 0.025%
Signal-to-noise ratio: ~98 dB
Dynamic range: ~98 dB
Headphone Output Power: 12 mW (RL = 32 ohms)
Green Jack: Headphones 3.5mm
Red (Pink) Jack: Microphone L: 42mm W: 20mm H: 9mm WT: .02
WARNING: This product can expose you to chemicals including Nickel which is known to the State of California to cause cancer and which is known to the State of California to cause birth defects and/or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Click to see Why is this here?
As of August 2018 the State of California has changed the requirements of the “Prop 65” law. We now must list on our website any possible chemicals the can cause cancer, birth defects or reproductive problem.
As an example:
ABS plastic contains styrene
PVC wire insulation can contain Di(2-ethylhexyl)phthalate (DEHP)
electrolytic capacitors can contain Ethylene glycol
Brass can contain Lead
flame retardant pc boards can contain Tetrabromobisphenol A (TBBPA)
Aluminum alloys can contain Chromium
To put it simply we are a small company and do not have the resources to test every single part, so we list every thing as hazardous. Please recycle all electronic parts responsibly and under no circumstance eat, drink or smoke these parts and wash your hands after touching!