Step Motor driver/controller with IR remote control, for 2 phase, 4 wire NEMA 14, 17 and small Can Stack motors.
Can be used to control higher power Drivers.
NOTE: Does NOT Retain Settings when Power Removed
Default: Speed Level "5" Motor "OFF"
Power: 5VDC ~300mA
IR Remote and/or Onboard switches control Speed & Direction
9 Level speed control.
LED Display for speed level.
Forward & Reverse Buttons
Press once, Motor Runs Press Again Motor Stops.
Recommend a 3-5V 4 wire Stepper
Will drive higher power motors depending on torque Load.
7in Pigtail Leads L: 2-1/16" W: 1-3/8" H: 5/8" WT: .06
WARNING: This product can expose you to chemicals including Nickel which is known to the State of California to cause cancer and which is known to the State of California to cause birth defects and/or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Click to see Why is this here?
As of August 2018 the State of California has changed the requirements of the “Prop 65” law. We now must list on our website any possible chemicals the can cause cancer, birth defects or reproductive problem.
As an example:
ABS plastic contains styrene
PVC wire insulation can contain Di(2-ethylhexyl)phthalate (DEHP)
electrolytic capacitors can contain Ethylene glycol
Brass can contain Lead
flame retardant pc boards can contain Tetrabromobisphenol A (TBBPA)
Aluminum alloys can contain Chromium
To put it simply we are a small company and do not have the resources to test every single part, so we list every thing as hazardous. Please recycle all electronic parts responsibly and under no circumstance eat, drink or smoke these parts and wash your hands after touching!
