Stepper Motor. 10.4V. with Bracket/Pigtail & 6.35 Coupling
Single axis set with Stepper, Mounting Bracket, 10in. Pigtail and Coupling for a 6.35mm shaft. Motor: MINEBEA: NEMA 17, 2 Phase Bi-Polar 4 lead
STEP ANGLE: 1.8 deg
340mN/m (48oz/in) holding torque.
4 M3-0.5 Threaded mounting holes. Coupling: 1 X 3/4 dia Helical Cut Aluminum Bracket: L: 2 (Motor) L: 2-1/16 (Base) W: 1-15/16, Gusseted steel L Bracket, Black finish. Four holes for motor & 2 slots for mounting the assembly
Includes Allen Wrench for Coupling and 4 Screws for Bracket. WT: .86
WARNING: This product can expose you to chemicals including Nickel which is known to the State of California to cause cancer and which is known to the State of California to cause birth defects and/or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Click to see Why is this here?
As of August 2018 the State of California has changed the requirements of the Prop 65 law. We now must list on our website any possible chemicals the can cause cancer, birth defects or reproductive problem.
As an example:
ABS plastic contains styrene
PVC wire insulation can contain Di(2-ethylhexyl)phthalate (DEHP)
electrolytic capacitors can contain Ethylene glycol
Brass can contain Lead
flame retardant pc boards can contain Tetrabromobisphenol A (TBBPA)
Aluminum alloys can contain Chromium
To put it simply we are a small company and do not have the resources to test every single part, so we list every thing as hazardous. Please recycle all electronic parts responsibly and under no circumstance eat, drink or smoke these parts and wash your hands after touching!