We do not include any printed materials of the following "Data Sheets". You will need to print from the following Document(s).
ZD Electronic Tools ZD-929C
Temperature controlled soldering station with Digital display. Heat sensor located near the tip for fast response and +-10 deg. “F” control. Rated at 48Watts, 24Vac handle.Temperature range: 320 deg. "F" to 800 deg. "F". Isolated tip, fused line. 117 VAC.
Extra tips are available for general replacement or special uses. WT. 4.8
WARNING: This product can expose you to chemicals including Nickel which is known to the State of California to cause cancer and which is known to the State of California to cause birth defects and/or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Click to see Why is this here?
As of August 2018 the State of California has changed the requirements of the “Prop 65” law. We now must list on our website any possible chemicals the can cause cancer, birth defects or reproductive problem.
As an example:
ABS plastic contains styrene
PVC wire insulation can contain Di(2-ethylhexyl)phthalate (DEHP)
electrolytic capacitors can contain Ethylene glycol
Brass can contain Lead
flame retardant pc boards can contain Tetrabromobisphenol A (TBBPA)
Aluminum alloys can contain Chromium
To put it simply we are a small company and do not have the resources to test every single part, so we list every thing as hazardous. Please recycle all electronic parts responsibly and under no circumstance eat, drink or smoke these parts and wash your hands after touching!
Used it very sparingly over 6 months. Excellent. Acurate.
Then one day no heat. Have not had a chance to open it up to see what failed.
- Alex, NC
Best solder station on the planet
Just what the title says. I have owned one for 10+ years under frequent, almost daily use without fail. Even though it still works perfectly with some TLC along the way, I just bought a new one and retired the old one to a backup status. No way Im throwing it out! It has earned its right to stick around. Best solder station on the planet....bar none.
- Jimi Ray, FL
Best hobby iron I have ever owned. and I have had lots
Perfect, good tip selection, plenty of heat and fast warm up.
- James Schings, KY
Definitely a best buy
I am another satisfied customer who has owned one of these for well over 10 years now. It is by far the best soldering iron I have ever owned. It is well made and nicely designed, with intuitive to operate and accurate temperature control for whatever the type of soldering work you need to use it for, degrees measured in C or F on its LED display. It is also pretty rugged - I have used it a few times in situations that were not a bench environment and as a result it has taken a few falls, surviving all so far without damage.
10+ years of satisfaction
I bought my ZD-939 soldering station around 12 years ago, in 2004. It has been my primary soldering tool since then. Im on my third replacement iron, with having quite a few instances of leaving it sit on overnight. The entire station has taken quite a few falls over the years, and so far the only part that has been broken is the plastic ring that sits in the end of the iron holder. At one time I attached a thermocouple to the tip of the iron with kapton tape for a comparison of accuracy, and the thermocouples readings were within 5 degrees of the stations. I have been completely satisfied with the station, and have recommended it on multiple occasions.
- Jim, OH
No-one has mentioned, this is ready-to work @500F, before I have found and unwound the solder Im about to use. NB the default display it powers up in is dec C, just hit thr F button, tho.
Its so fast, it changed the way I work, now I can power off for 5-10 min, power right back up.
review hanging in the balance
I was soldering some wires at about 750 degrees and it quit. The fuse is good so I emailed the company. I have used it before with great results but now I just dont know.
- Jimmie Harris, TX
cant beat it
i picked this up about 5 years ago.. i had been shopping for a soldering station for a while and ran across this one for 49 bux.. still using the same tip that it came with,, i picked up extra tips and iron for it along with all the attachments they make when i got it .. so after 5 years i am very happy with it
- gorge garcia, MI
Great value for the money.
This soldering station has been my workhorse for 4 years. Buying my second one now. I have proven that it will not support the full weight of an automobile.
- Kevin, MN
I was skeptical because of the price, but when I received the unit I was very impressed! Heavy, solidly built solder station that performs well. The iron as well, is well-built and not light and cheap feeling. Added the hot tweezer accessory to my order and am very please with it, too.
Definitely a Best Buy
I have owned this station for more than 2 years and it has never let me down. Tips maintain heat well. My only problem has been that a tip I have had on the unit for more than a year has bonded itself to the handle. I was trying to switch to a larger tip when I noticed the issue. With the low cost of replacement handles/heaters I just bought another one for the larger tip and left that handle with the fine tip. I also have the hot tweezers which help in removing larger parts during rework. Overall a fantastic tool at a great price.
- Bill, CA
Hands Down Best Soldering Iron!!
Ive had my ZD929c for quite a few years and cannot live with out it. I use it for automobile work, electronics, hobbies, etc. and it works great every time.
- Mike G, WA
Best deal around!
Cant live without this! I have been using this unit for over 2 years. You cant beat the price for the quality!