|
|
| |||||||||||
|
|
|
| ||||||
|
|
| |||||||||||
|
|
|
| ||||||
 |
WARNING: This product can expose you to chemicals including Nickel which is known to the State of California to cause cancer and which is known to the State of California to cause birth defects and/or other reproductive harm. For more information, go to www.P65Warnings.ca.gov Click to see Why is this here?
As of August 2018 the State of California has changed the requirements of the “Prop 65” law. We now must list on our website any possible chemicals the can cause cancer, birth defects or reproductive problem.
As an example: ABS plastic contains styrene PVC wire insulation can contain Di(2-ethylhexyl)phthalate (DEHP) electrolytic capacitors can contain Ethylene glycol Brass can contain Lead flame retardant pc boards can contain Tetrabromobisphenol A (TBBPA) Aluminum alloys can contain Chromium To put it simply we are a small company and do not have the resources to test every single part, so we list every thing as hazardous. Please recycle all electronic parts responsibly and under no circumstance eat, drink or smoke these parts and wash your hands after touching! |
Product Reviews Click here to review this item | ||
| ||
 |
Will not work with flat-top 18650s out of the box | |
| If used with 18650 batteries that are flat-top instead of bumped-top, two of the positive terminals which have wires going to them will not allow the terminals to make contact with the batteries. This is due to the crimped wire terminals being too thick and pushing against the outer radius of the battery. I fixed it using lockjaws, by squeezing the brass crimped end against the holders plastic frame. | ||
| - H Bustani, NV | ||
©2024 Company. All Rights Reserved.