Model: SP1848-27145 moisture sealed Seebeck thermoelectric module used to generate power from temperature difference between hot side and a cold side.
Working Environment: -60 to 120°C NOTE: DO NOT EXCEED 150°C
Cold side must be attached to a heatsink to remove the heat! Without cooling, module will heat up and fail
Cold Side: Side with Model Number
Temperature electromotive force (a): > 190x uV/°C
"Sweet Spot" (Z): 2.5 ~ 3x10-3W/°C
Output : Voc: Voltage Open Circuit/Isc: Current Short Circuit
Temperature Differential (°C)
Leads: ~30CM SQ: 40mm H: 3.4mm WT: .1
WARNING: This product can expose you to chemicals including Nickel which is known to the State of California to cause cancer and which is known to the State of California to cause birth defects and/or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Click to see Why is this here?
As of August 2018 the State of California has changed the requirements of the “Prop 65” law. We now must list on our website any possible chemicals the can cause cancer, birth defects or reproductive problem.
As an example:
ABS plastic contains styrene
PVC wire insulation can contain Di(2-ethylhexyl)phthalate (DEHP)
electrolytic capacitors can contain Ethylene glycol
Brass can contain Lead
flame retardant pc boards can contain Tetrabromobisphenol A (TBBPA)
Aluminum alloys can contain Chromium
To put it simply we are a small company and do not have the resources to test every single part, so we list every thing as hazardous. Please recycle all electronic parts responsibly and under no circumstance eat, drink or smoke these parts and wash your hands after touching!