Microprocessor controlled Hot Air soldering rework & repair station for SMD/PLCC/SOIC/QFP devices and FFC Cables.
Power: 110-130VAC 50/60Hz 300W
Temp. Range: ~100-~500"C"
Selectable "F"/"C" readout
Auto Standby: Saves energy and prolongs heater life
Auto start when you remove the handle from the holder
Auto delay of blower for cool down on replacing the handle in holder(~2min)
Includes: 4.3mmID/5mmOD Nozzle, 7.5mmID/8mmOD Nozzle & 11.5mmID/12mmOD Nozzle
CE listed WT: 2.7
WARNING: This product can expose you to chemicals including Nickel which is known to the State of California to cause cancer and which is known to the State of California to cause birth defects and/or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Click to see Why is this here?
As of August 2018 the State of California has changed the requirements of the “Prop 65” law. We now must list on our website any possible chemicals the can cause cancer, birth defects or reproductive problem.
As an example:
ABS plastic contains styrene
PVC wire insulation can contain Di(2-ethylhexyl)phthalate (DEHP)
electrolytic capacitors can contain Ethylene glycol
Brass can contain Lead
flame retardant pc boards can contain Tetrabromobisphenol A (TBBPA)
Aluminum alloys can contain Chromium
To put it simply we are a small company and do not have the resources to test every single part, so we list every thing as hazardous. Please recycle all electronic parts responsibly and under no circumstance eat, drink or smoke these parts and wash your hands after touching!
I repair cell phones and tablets and this works great for heating the adhesives that hold the phones together. Also fantastic for heat-shrink tubing where a big heat gun might damage the surrounding area.