Precision Humidity & Temperature mini shield for the Arduino compatable processors. Direct plug to WeMos D1 modules NOTE: Module Is Software Driven:
Useful link
https://github.com/wemos/WEMOS_SHT3x_Arduino_Library
Sensor Mfr: Sensirion
Model #: SHT30-DIS
Power: 2.4 to 5.5 V (typ. 3.3V)
Humidity Range: 0 - 100% RH
Accuracy: +/- 3% RH
RH Tesponse Time: ~8 sec (tau63%)
Temperature Range: -40 to +125°C (-40 to +257°F)
Accuracy: +/- 0.3°C
Temperature Tesponse Time: ~ 2sec
Interface: I2C:
Factory Set : 0x45 Changable to 0x44
SDA pin: Connected to D2
SCL pin: Connected D1
Includes two 8pin 0.1" Pitch Headers W: 1-1/16" H: 1-1/8" D: 1/8" WT: .02
WARNING: This product can expose you to chemicals including Nickel which is known to the State of California to cause cancer and which is known to the State of California to cause birth defects and/or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Click to see Why is this here?
As of August 2018 the State of California has changed the requirements of the “Prop 65” law. We now must list on our website any possible chemicals the can cause cancer, birth defects or reproductive problem.
As an example:
ABS plastic contains styrene
PVC wire insulation can contain Di(2-ethylhexyl)phthalate (DEHP)
electrolytic capacitors can contain Ethylene glycol
Brass can contain Lead
flame retardant pc boards can contain Tetrabromobisphenol A (TBBPA)
Aluminum alloys can contain Chromium
To put it simply we are a small company and do not have the resources to test every single part, so we list every thing as hazardous. Please recycle all electronic parts responsibly and under no circumstance eat, drink or smoke these parts and wash your hands after touching!