We do not include any printed materials of the following "Data Sheets". You will need to print from the following Document(s).
Encoder for CNC Machines, Microcontrollers
400PPR Bi-phase rotary encoder provides a 2 Phase output for detecting speed & direction.
Power: 6V-24VDC @ <100mA
Output: NPN Open Collector (Requires Pull-up Resistor)
30mA Sink
Waveform: 2 phase rectanglar orthogonal pulse
Resolution: 0.9deg. (400Pulse/360deg. rotation)
Phasing: A before B or B before A (rotation dependent)
Speed: < 1000 RPM
Shaft: 6mm Dia. X 16mm
Mounting: Front/ M3-.5 threaded holes
3 on 28mm Dia @ 120deg & 3 on 30mm @ 120deg. Connections: 2m Cable DIA: 38mm (Body) L: 40mm (Body) WT: .4
WARNING: This product can expose you to chemicals including Nickel which is known to the State of California to cause cancer and which is known to the State of California to cause birth defects and/or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Click to see Why is this here?
As of August 2018 the State of California has changed the requirements of the “Prop 65” law. We now must list on our website any possible chemicals the can cause cancer, birth defects or reproductive problem.
As an example:
ABS plastic contains styrene
PVC wire insulation can contain Di(2-ethylhexyl)phthalate (DEHP)
electrolytic capacitors can contain Ethylene glycol
Brass can contain Lead
flame retardant pc boards can contain Tetrabromobisphenol A (TBBPA)
Aluminum alloys can contain Chromium
To put it simply we are a small company and do not have the resources to test every single part, so we list every thing as hazardous. Please recycle all electronic parts responsibly and under no circumstance eat, drink or smoke these parts and wash your hands after touching!