Raspberry-Pi-2B Controller with Power Supply Basic Kit
Full featured 32 bit, Raspberry-PI 2 Model B
This small card sized microcomputer Features: Broadcom’s BCM2836 SOC 900mHz processor,1GB RAM and VideoCore IV 3D Graphics core
Requires you to download an Operating System to your SD Card
Software: Full range of ARM GNU/Linux distributions
NOOBS, Raspbian, Pidora, Windows10 (Fall of 2015)
For details, instructions and downloads see below
Processor: 900MHz BCM2836RIFBG ARMv7
Power: 5VDC 1.8A Via a micro USB connector
depending on USB & Port loading.
I/O : 4 USB 2.0 Ports
1 Ethernet 10/100 Port
1 HDMI Port (Rev. 1.4)
1 3.5MM 4 conductor Audio/Video Jack (TRRS)
1 Camera Ribbon cable connector (CSI)
1 LCD Display Ribbon cable connector (DSI)
40 Pin header for SPI, & GPIO, UART, Power
Storage: Micro SD Card Slot (8GB min needed)
SD card stores Operating System
Power Port: Micro B USB
L: 3” O/A W: 2-1/2” H: 3/4”
Power Supply & Cable
Higher Output Supply and Adapter Cable for the Raspberry-Pi 2B.
Includes a 5V 4A regulated plug supply with a 5.5/2.1mm Plug and a mating 4-1/2in. adapter cable with a USB Micro B Plug for the Pi.
Basic Starter Set Ship Wt: 1.1
Documentation:
CHECK with Links Below for Latest Updates
www.raspberrypi.org/documentation/hardware/raspberrypi/
Operating System Software Available:
www.raspberrypi.org/downloads
Beginners should start with NOOBS (New Out Of Box Software)
Available Operating Systems:
RASPBIAN
PIDORA
Snappy Ubuntu Core
OPENELEC (XBMC Media Center)
RASPBMC (XBMC Media Center)
RISC OS (a Non LINIUX Based O/S)
Windows 10
