WARNING: This product can expose you to chemicals including Nickel which is known to the State of California to cause cancer and which is known to the State of California to cause birth defects and/or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Click to see Why is this here? As of August 2018 the State of California has changed the requirements of the “Prop 65” law. We now must list on our website any possible chemicals the can cause cancer, birth defects or reproductive problem.
As an example:
ABS plastic contains styrene
PVC wire insulation can contain Di(2-ethylhexyl)phthalate (DEHP)
electrolytic capacitors can contain Ethylene glycol
Brass can contain Lead
flame retardant pc boards can contain Tetrabromobisphenol A (TBBPA)
Aluminum alloys can contain Chromium
To put it simply we are a small company and do not have the resources to test every single part, so we list every thing as hazardous. Please recycle all electronic parts responsibly and under no circumstance eat, drink or smoke these parts and wash your hands after touching!
|Product ReviewsClick here to review this item|
|Rackmount ABS enclosure|
|This is a nice, inexpensive, durable, easily machinable, rackmount enclosure. When you assemble the 3U enclosure you will find that there is a certain instability or flimsiness due to the mating of three individual sections. Even when the four screws that hold the enclosure together are tightened down you can physically separate the sections to a certain extent because of the flexibility of the plastic. To eliminate this I used some 2-part epoxy specifically designed for ABS plastic. When a small amount of epoxy is applied to the plastic pieces that join the three sections the enclosure becomes much more rigid.|
|- Dave, IL|
©2023 Company. All Rights Reserved.