Snap-in LED Digital panel meter contains both a 3 digit AC Volt Meter and a 3 digit AC Ammeter with built-in Current Transformer
Character Height: 0.39in.
Voltage: 80-300VAC Resolution: 1V
Current: 0-50A Resolution: .1 Amp
Accuracy: +-1% +2LSD
Current Transformer: 6.5mm ID.
Input: Terminal Strip
Cutout: W: 68mm H: 38mm W: 2-3/4 H: 1-5/8 D: 1-11/16 WT: .12
WARNING: This product can expose you to chemicals including Nickel which is known to the State of California to cause cancer and which is known to the State of California to cause birth defects and/or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Click to see Why is this here?
As of August 2018 the State of California has changed the requirements of the Prop 65 law. We now must list on our website any possible chemicals the can cause cancer, birth defects or reproductive problem.
As an example:
ABS plastic contains styrene
PVC wire insulation can contain Di(2-ethylhexyl)phthalate (DEHP)
electrolytic capacitors can contain Ethylene glycol
Brass can contain Lead
flame retardant pc boards can contain Tetrabromobisphenol A (TBBPA)
Aluminum alloys can contain Chromium
To put it simply we are a small company and do not have the resources to test every single part, so we list every thing as hazardous. Please recycle all electronic parts responsibly and under no circumstance eat, drink or smoke these parts and wash your hands after touching!
This meter works great in my travel trailer. It was cumbersome to install because the CT is directly on the circuit board so it required an extra 10 AWG wire for that. But the current meter is very precise down to 0.01 A. The only real drawback is it is not enclosed since it takes a BIG wire for the CT. I plan to put it inside a duplex J box and cut out a blank to fit it.
Works great and Ive had no problems at all. Meter is very accurate.