4 Pack of Rubber shock mount/vibration isolators with M5-.8 X 12mm (7/16) long threaded stud on both ends. Anti-vibration nuts Included. DIA: 9/32 (15mm) L: 5/8 (16mm) (Body) WT: .1
WARNING: This product can expose you to chemicals including Nickel which is known to the State of California to cause cancer and which is known to the State of California to cause birth defects and/or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Click to see Why is this here?
As of August 2018 the State of California has changed the requirements of the Prop 65 law. We now must list on our website any possible chemicals the can cause cancer, birth defects or reproductive problem.
As an example:
ABS plastic contains styrene
PVC wire insulation can contain Di(2-ethylhexyl)phthalate (DEHP)
electrolytic capacitors can contain Ethylene glycol
Brass can contain Lead
flame retardant pc boards can contain Tetrabromobisphenol A (TBBPA)
Aluminum alloys can contain Chromium
To put it simply we are a small company and do not have the resources to test every single part, so we list every thing as hazardous. Please recycle all electronic parts responsibly and under no circumstance eat, drink or smoke these parts and wash your hands after touching!
These are a good value compared to retail is you need shear isolators. I tested them and estimate that they would be rated for maximum static shear load of about 4 to 5 pounds for shear deflection of about 10% to 15% for maximum rubber life.
However, I highly recommend that MPJA or the user provide plain nuts with lock washers instead of the Nylock nuts now provided. The torque required to seat the Nylock nuts twists the isolator rubber up to 90 degrees, then locks in the twist as they seat. This amount of twist greatly exceeds the recommended long-term distortion of rubber isolators.