20A 12-80V DC Motor Speed Control & Display

20A 12-80V DC Motor Speed Control & Display
Stock Number: 35759 MD
 Review Average:  
 Number of Reviews: 2
 View ReviewsReview this item

Availibilty: In Stock   Units: 37

     Email this to a friend     

Detailed Description

Modular, enclosed, wide range control with "Relative Speed" Display. Uses PWM to vary the speed of DC motors. On-board adjustment pot. Terminal strip for power & Motor connections.
Input: 12- 80VDC
Output: 20A max. 30A Surge
Recommended: 12V/250W, 24V/350W, 48V/500W
Range: 0%-100% of rated motor RPM
Frequency: 21KHz.
Display: 3 Digit 0.56" LED.
Pigtail: 7in.
Range: 0-100% of Motor Max Speed
25 = 25% 75= 75% of RPM
Display Cutout: L: 2-7/8" W: 1-9/16"
Display: L: 3-1/8" W: 1-11/16" D: 1-1/8"
Module: L: 4-3/8” W: 3-3/4” O/A H: 1-3/8”
WT: .5

California Proposition 65 Warning WARNING: This product can expose you to chemicals including Nickel which is known to the State of California to cause cancer and which is known to the State of California to cause birth defects and/or other reproductive harm. For more information, go to www.P65Warnings.ca.gov

 Product ReviewsClick here to review this item
Good circuit, but bad enclosure
The circuit is good and works well with my 300W dc spindle motor. The enclosure isn't so great though. The mounting tab for the PCB shorts the 5V to ground. A different location would have made all the difference.
machine control power feed
Great power supply ! Building 3 power feeds for my mini mills and lathe. Use only this controller on motors 32575MD and 33085MD , this is a high toque motor. Ive tested all the speed controllers and this is the best.
- Michael Bush, SC