Self adjustable ratcheting crimping tool with 5 interchangeable jaws for insulated and non-insulated terminals and connectors .
Crimpinge range from 0.5 to 35(mm˛).
Adjustable crimping pressure and ratchet release pressure.
Includes: Screwdriver for changing the interchangeable Jaws
and a soft nylon pouch for storage,easy to carry.
5 interchangeable Jaws
A10 (for 1.5 - 6.0 mm ˛): for non-insulated terminals
A26TW (for 2 *(0.5 0.75 1 1.5 2.5 4 6)mm ˛): for insulated and non-insulated ferrules
A35WF (for 10 15 25 35 mm ˛): for non-insulated ferrules
A03B (for 0.5-1.0 1.5-2.5 4.0-6.0 mm ˛): for non-insulated tabs and receptacles
A30J (for 0.5 - 6.0 mm ˛): for insulated terminals
Size of Crimping tool: 22 x 6cm/8.66 x 2.36"(L x W) Tool: L: 8-5/8" W: 3" T: 7/8" Ship WT: 2.4
WARNING: This product can expose you to chemicals including Nickel which is known to the State of California to cause cancer and which is known to the State of California to cause birth defects and/or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Click to see Why is this here?
As of August 2018 the State of California has changed the requirements of the “Prop 65” law. We now must list on our website any possible chemicals the can cause cancer, birth defects or reproductive problem.
As an example:
ABS plastic contains styrene
PVC wire insulation can contain Di(2-ethylhexyl)phthalate (DEHP)
electrolytic capacitors can contain Ethylene glycol
Brass can contain Lead
flame retardant pc boards can contain Tetrabromobisphenol A (TBBPA)
Aluminum alloys can contain Chromium
To put it simply we are a small company and do not have the resources to test every single part, so we list every thing as hazardous. Please recycle all electronic parts responsibly and under no circumstance eat, drink or smoke these parts and wash your hands after touching!
Good quality, perfect value for the money. Exactly what I expected. Five stars service, fast delivery.
- M, CA
Must have for Crimping Connectors
Simple to Change the Crimping Dies,Great leverage, Great Ratcheting System and Ergonomic Grip
- G M, CA
Almost useless for wire sizes 22 and smaller
I ordered this tool hoping it would do a better job than #11763TL on small pins such as the 1926x series or those in set 33906D wire sizes 22, 24, or even smaller. The photos show 5 different die pairs, but 4 of them are built for crushing tubular-type terminals onto medium to large wire sizes. In the whole set theres just one notch that might have been able to close small open-trough terminals, except that the hard stops on that die pair prevent it from closing down to less than about 2mm, so it has no effect at all on those small pins.
My tool also arrived with surface rust on one or two dies, and without instructions. Im a frequent MPJA customer, but this is my most disappointing purchase ever.