/ /

Mini LASER Head, 635nm, <5mw

Stock No: 19566 LZ

Review Average:

Number of Reviews: 4

View Reviews | Review this item

$2.25

Availibilty: In Stock Units: 455

Quantity

SHARE
Tweet		Share

Detailed Description

We do not include any printed materials of the following "Data Sheets". You will need to print from the following Document(s).

Mini LAZER - <5mw, 635nm Red Laser Diode head for aiming, alignment or other uses.
3mm aperture
0.8m Radians Divergence
3.0VDC operation, Forward current <40mA.
5V max Reverse Voltage.
6mm Dia. Brass Body, 2in Leads
Dia: 6mm L: 15mm WT: .001

WARNING: This product can expose you to chemicals including Nickel which is known to the State of California to cause cancer and which is known to the State of California to cause birth defects and/or other reproductive harm. For more information, go to www.P65Warnings.ca.gov

Product ReviewsClick here to review this item

	Verified Purchase
works great, thank you
eBay

	Great little laser.
I mounted one to the head of my laser cutter/engraver to line up the laser head when setting up projects. It eliminates the need to energize the laser tube and waste material. Works great!
William Justic

	Not for long hours of use.
These work well for maybe 100 hours and the die. Plan your project with this in mind.
- Charles, WA

	Easy to transmit voice over this laser beam.
Feed the red wire with 9 volts thru a 200 Ohm resistor. Feed audio at 1 volt P-P thru a 4.7 UFD cap to the red wire. Positive cap lead to red wire audio ground to battery negative. Receiver is just a solar cell feed into high gain amplifier. Range easily 300 feet!
- Carl, TN

Mini LASER Head, 635nm, <5mw

You may also like: