3D Printer/CNC Leadscrew with 24VDC motor
Gearhead motor with Leadscrew designed for 3D printing or CNC machines. ~ 4sec travel time @ 24VDC
Motor: Pittman 9234
Coil: 24V @ ~ 160mA No Load (>8A @ Max Torque)
12V @ <150mA No Load/4A Stall
Gearhead: G51A 5.9/1 Ratio
RPM: ~525 @ 12V
~1050 @ 24V
Mounting Holes: Front: Two 10-32, Rear: Four 6-32
Leadscrew: T3/8 - 8, Single Start, Right Hand ACME Thread
Length: 9in (229mm) Thread: 8in
Effective Nut Travel:~7-1/8in. (185mm)
Nut: Nylon, 28.5mm Dia. O/A X 25.5 Long O/A, three 3mm holes NOTE: Leadscrew Not removable from Motor L: 330mm O/A DIA: 50mm WT: 1.3
WARNING: This product can expose you to chemicals including Nickel which is known to the State of California to cause cancer and which is known to the State of California to cause birth defects and/or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Click to see Why is this here?
As of August 2018 the State of California has changed the requirements of the Prop 65 law. We now must list on our website any possible chemicals the can cause cancer, birth defects or reproductive problem.
As an example:
ABS plastic contains styrene
PVC wire insulation can contain Di(2-ethylhexyl)phthalate (DEHP)
electrolytic capacitors can contain Ethylene glycol
Brass can contain Lead
flame retardant pc boards can contain Tetrabromobisphenol A (TBBPA)
Aluminum alloys can contain Chromium
To put it simply we are a small company and do not have the resources to test every single part, so we list every thing as hazardous. Please recycle all electronic parts responsibly and under no circumstance eat, drink or smoke these parts and wash your hands after touching!