High-power 50W LED Grow Light module with constant power regulation, over Temperature and Voltage protection. Designed to be hardwired into a fixture with ~600 square inch of Heatsink
Entire back of module should be coated with thermal compound and contact heatsink
Sealed to IP65
Wavelength: ~400-840nm PINK
Lumens: 2500min. L: 3-1/16" W: 1-3/4" T: 1/4" WT: .05
WARNING: This product can expose you to chemicals including Chromium which is known to the State of California to cause cancer and which is known to the State of California to cause birth defects and/or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Click to see Why is this here?
As of August 2018 the State of California has changed the requirements of the “Prop 65” law. We now must list on our website any possible chemicals the can cause cancer, birth defects or reproductive problem.
As an example:
ABS plastic contains styrene
PVC wire insulation can contain Di(2-ethylhexyl)phthalate (DEHP)
electrolytic capacitors can contain Ethylene glycol
Brass can contain Lead
flame retardant pc boards can contain Tetrabromobisphenol A (TBBPA)
Aluminum alloys can contain Chromium
To put it simply we are a small company and do not have the resources to test every single part, so we list every thing as hazardous. Please recycle all electronic parts responsibly and under no circumstance eat, drink or smoke these parts and wash your hands after touching!
I waited to see results before commenting. The grow lamps worked great as a addition to the T8 florescent lamps I normally use. I was impressed with the results and will order a few more for next year. The plants looked much greener and healthier.
Measured power consumption was approximately 6 watts per module and with a 35 sq inch heat sink per module they were warm to the touch and very bright. Maybe the 50 watt rating is an equivalent to incandescent lamps.
I am very happy with these modules and persons that saw the plants were impressed also.
I grew Tomatoes, Peppers Hot and Mild and Basil
- Karl, PA
could be so much better...
bought three - excellent. blindngly bright runs cool on 300 in2 heat sink. 0.05A each. bought 4 more. these run hot and consume 0.6A cant see any difference in components or light. light looks the same but the eye is easily fooled..
Not a 50W light
The actual power consumption of the unit that was sold to me is about 6 W. The light intensity is very bleak. It could be a technical mistake and the unit is for 220-240V AC, but no, increasing AC voltage to 150V doesnt change much the consumed power nor light output. Very disappointed, after being a happy customer for 15+ years.
- Alex, TX
Easy to use LED
About ten watt. Very bright. Mounted two on .large heat sink. No fan needed.
Very hard to solder power leads when mounted on heat sink. Four mounting holes are 1.335 inch. I used 6 32 screws. Good LEDS easy to use