Input: 110-260VAC 50-60Hz Output: 28V-40VDC @600mA +- 5% Specifications/Features: Sealed metal & plastic cased, Mini Switching constant current LED driver for driving one 20W, Two 10W connected in series or six -nine 3W series/parallel LEDs. 12 AC leads, 10 DC Leads.
IP65 sealed for damp locations.
Not for use with Dimmers. L: 3-5/8" W: 1-3/16" T: 7/8" WT: .22
WARNING: This product can expose you to chemicals including Chromium which is known to the State of California to cause cancer and which is known to the State of California to cause birth defects and/or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Click to see Why is this here?
As of August 2018 the State of California has changed the requirements of the Prop 65 law. We now must list on our website any possible chemicals the can cause cancer, birth defects or reproductive problem.
As an example:
ABS plastic contains styrene
PVC wire insulation can contain Di(2-ethylhexyl)phthalate (DEHP)
electrolytic capacitors can contain Ethylene glycol
Brass can contain Lead
flame retardant pc boards can contain Tetrabromobisphenol A (TBBPA)
Aluminum alloys can contain Chromium
To put it simply we are a small company and do not have the resources to test every single part, so we list every thing as hazardous. Please recycle all electronic parts responsibly and under no circumstance eat, drink or smoke these parts and wash your hands after touching!
I bench tested 2 of 6 units i purchased. The output current is 500 mA +- 1 mA this meets the 5% at 500 mA but not 600 mA as stated on the units placard. With a 60 ohm 50 watt load on the output the current is constant from 110 vac to 250 vac on the on the input. Good regulation but not at 600 mA.