4-20mA Current Loop Signal Generator

4-20mA Current Loop Signal Generator
Stock Number: 35803 TE
 Review Average:  
 Number of Reviews: 1
 View ReviewsReview this item

Availibilty: In Stock   Units: 54

     Email this to a friend     

Detailed Description

View PDF Data Sheet

Small panel mounted, snap-in, Current Loop Simulator with backlit LCD Display. Can be used to simulate Controller or Sensor.
Passive, non-polarized 2 wire system, compatible with 2, 3, 4 wire system, Linear output that can be calibrated
Rotary encoder/Button for setup & testing.
Programmable Output to simulate sensor signals, Set 2-9 points to adjust, set 1-9 curve segments.
Supply voltage: 15V - 30V;
Output Range: 4-20mA / 3-21mA;
Display Mode: Actual Current / 0-100.0% / 0-50.0Hz;
Sampling resistance: < 500 ohms;
Output Accuracy : ± 5%; Display accuracy: 0.01
Cutout: 77mm x 40mm
W: 79.5mm H: 42.2mm D: 25.5mm (Body) 50mm O/A WT: .1

California Proposition 65 Warning WARNING: This product can expose you to chemicals including Nickel which is known to the State of California to cause cancer and which is known to the State of California to cause birth defects and/or other reproductive harm. For more information, go to www.P65Warnings.ca.gov

 Product ReviewsClick here to review this item
Works well in my control system test panel 2/9/2022
Im using two of these 4-20 ma current loop signal generators in a PLC test panel I built. It works well with minimal error.