Dual "H" Bridge DC Motor Driver

Stock Number: 35567 MP
  Be the first to review this item

Availibilty: In Stock   Units: 2

     Email this to a friend     

Detailed Description

View PDF Data Sheet

Dual Half-Bridge Driver board for microcontrollers. Drives 2 DC motors. Uses PWM driven IRF3205 MOSFET transistors for low switching losses.
Logic Power: 5VDC
Motor Power: 5-35VDC
Output: 10A Max (Above need Heatsinks for transistors)
NOTE: Transistors must be Electrically Isolated from Heatsink
PWM Input: Logic levels from microcontroller 0-99% duty cycle
Motor Forward: DIR = logic "1" PWM =Waveform 0-99% Duty
Motor Reverse: DIR = logic "0" PWM = Waveform 0-99% Duty
Breaking: DIR = X PWM = logic "0" (X is an arbitrary state)
NOTE: Cannot operate at 100% Requires either a "0" or a waveform
Connections: 6 Pin Header, 0.1" Pitch for Logic Input & Power
Terminal Strip for Motor Outputs & Power
L: 4-1/4" W: 2-3/8" H: 1-1/8" WT: .13

California Proposition 65 Warning WARNING: This product can expose you to chemicals including Nickel which is known to the State of California to cause cancer and which is known to the State of California to cause birth defects and/or other reproductive harm. For more information, go to www.P65Warnings.ca.gov