Panel 50-500VAC Voltmeter Green

Panel 50-500VAC Voltmeter Green
Stock Number: 34658 ME
 Review Average:  
 Number of Reviews: 3
 View ReviewsReview this item

This item is NO LONGER available. Please use our SEARCH feature and see if you can find an alternate item for what you were looking for.
This item is no longer available

     Email this to a friend     

Detailed Description

A different style of AC Voltage Panel meter
Round 3 digit color LED with matching color cover
Voltage Range: Sine Wave Only
Min/Max 50-500VAC 50/60Hz
Operating: 80-480VAC
Current: ~ 16mA
Character Height: 11mm (~0.43in)
Temperature: -25"C"~ +65"C"
Humidity: <98% Non Condensing
Mounting Hole: 22mm
L: 2" Dia: 1-1/8" O/A WT: .04

California Proposition 65 Warning WARNING: This product can expose you to chemicals including Nickel which is known to the State of California to cause cancer and which is known to the State of California to cause birth defects and/or other reproductive harm. For more information, go to

 Product ReviewsClick here to review this item
Modification to a meter module running off of 5 volts
These meter module can be modified to run off 5 volts for the meter module when you remove the meter module from its case you see two or three resistors and a capacitor in series to the meter module just have to trace where the two or three resistors are hooked to meter module figure out which one is the meter power supply versus the meter measuring input The amperage meter is the simplest one to do because you only have the meter module power supply wires are just make sure which connection is possible and which one is negative the current sensor transformer is wired to a connector
Sunny Jacksonville
Poor quality, inaccurate
Poor build quality, display circuit board mounted at an angle to the front bezel. Compared meter reading to my DVM and it was .2 to .5 volts lower in reading from 6v to 30v output of lab power supply. No cal pot to adjust. Meter lights at about 4.5 volts, but isnt even close in reading til you hit 6.5 volts though input is speced for 6 volt min. Pos and Neg terminals not marked, need to guess which is which! MPJA #19600 works much better!
- Kenneth Scharf, FL
very accurate voltmeter
After testing, I can say that this voltmeter is very accurate, would definitely recommend to anybody in need of one.

You May Also Like