Interesting LED 12 hour Digital Clock that Sequentially displays Year, Date, Time & Temperature in “Fahrenheit”. Several selectable counting patterns of LEDs in a ring around the edge that mark off the seconds.
Power: 5VDC @ ~50mA
Hourly Pulse Beep ON/OFF
Settable Alarm Clock ON/OFF & Time
Settable Temperature Alarm ON/OFF, High & Low Alarm
Battery Backup for Settings & Time values only (no display)
USB Mini B Power connector
Includes 3ft. USB cable
Acrylic Plastic Case: Order 35700-BX SQ: 3-3/8" D: 3/4" WT: .2
WARNING: This product can expose you to chemicals including Nickel which is known to the State of California to cause cancer and which is known to the State of California to cause birth defects and/or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Click to see Why is this here?
As of August 2018 the State of California has changed the requirements of the “Prop 65” law. We now must list on our website any possible chemicals the can cause cancer, birth defects or reproductive problem.
As an example:
ABS plastic contains styrene
PVC wire insulation can contain Di(2-ethylhexyl)phthalate (DEHP)
electrolytic capacitors can contain Ethylene glycol
Brass can contain Lead
flame retardant pc boards can contain Tetrabromobisphenol A (TBBPA)
Aluminum alloys can contain Chromium
To put it simply we are a small company and do not have the resources to test every single part, so we list every thing as hazardous. Please recycle all electronic parts responsibly and under no circumstance eat, drink or smoke these parts and wash your hands after touching!
Is there any other way to power the clock, other then the USB port
- Jeffrey Harshman, NJ
This thing is pretty cool for the price! I just bought another plus a couple of cases for a friend and the one I have now. You really cant beat it for the price! Really cool product! A+++
- Jon Severt, OH
The kit went together perfectly and operates flawlessly. I love the multiple display modes. Get the case for a wonderfully finished clock.
- Mark, NJ
The clock is easy to set, has many features, is ridiculously inexpensive. The plexiglass case is really good, easy to assemble. My wife removed the paper from the plexiglass for me I found that a bit troublesome.
I suppose it is not possible to make it stop cycling and just read the time or temperature. I would have multiple units used as stand alone time and temperature readouts if so.
Thanks for making this nice little clock available.
- victor nettle, FL
Nice clock for the price! Wish the brightness adjustment had been addressed in the data sheet. Thanks to the reviewer who provided that info. Now if only there was a fine tuning of the temperature reading, mine typically reads 2-5 degrees high. Other than that, Im content.
- Michael G, NM
Dazzling, fun clock
So many blinkenlights! Definitely an attention-getter. I recommend getting the case for it, otherwise the USB power plug on the back makes the clock hard to display.
One minor demerit - the temperature sensor on my clock gives an accurate reading only at initial power-on. It seems to self-heat after minute or so. Within five minutes it was reading five degrees above actual ambient temp in the room.
- Jeffrey Bowles, OH
Un documented brightness control
Great clock! Thank goodness for others reviews, or I wouldnt have known about the brightness control setting cause its not in the instructions. Default brightness is way too bright for my use.
Nice Little LED Clock
Looks great! Easy to set up once you get accustomed to the programming sequence. I just ordered several more plus the plastic cases to give to friends.
- Jim C., CA
Missing LEDs but customer service came through
I ordered 3 of these. 1 woked great but 2 of them were missing LEDs. I emailed customer service and they replaced them immediately. I tested the replacement ones and they are fine. Great little clocks. I will probably order more soon. Just check them thoroughly when you get them.
Additional feature not documented in instruction sheet
I found that this clock also allows you to adjust the display brightness. To adjust the brightness, press and hold the RST button and after a few seconds the display will begin cycling through various levels of brightness. Release the RST button when it gets to your preferred brightness setting.
Good Basic Electronic Clock
It works as described. The Look of this clock gives great feeling of electronics for young kids.
Also have lot of feature packed in this clock for the price.