Panel mount charge (SOC - State of Charge) meter for batteries.
Color Graphics with backlight. LCD display shows % Charge, Voltage and "Fuel Gauge" segmented Battery Outline.
NOTE: you must High & Low Limits for the Battery you are using.
Retains Settings when OFF
Direct Power supply:
Measurement range: DC8-100V
Individual power supply
Individual power supply range: DC5 to 12V max
Measurement range: DC0-100V
<10V display format: 9.99V 10mV Resolution
<100V display format: 99.9V 100mV Resolution
100V display format: 100V
<10% display format: 9%
<100% display format: 99%
100% display format: 100%
Display: Battery Symbol (Five section)
90% + display full cells
SOC <80% display four cells
And so on……
Cut Out: 87x 47mm W: 89.6mm H: 49.6mm D: 24.5mm WT: .25
WARNING: This product can expose you to chemicals including Nickel which is known to the State of California to cause cancer and which is known to the State of California to cause birth defects and/or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Click to see Why is this here?
As of August 2018 the State of California has changed the requirements of the “Prop 65” law. We now must list on our website any possible chemicals the can cause cancer, birth defects or reproductive problem.
As an example:
ABS plastic contains styrene
PVC wire insulation can contain Di(2-ethylhexyl)phthalate (DEHP)
electrolytic capacitors can contain Ethylene glycol
Brass can contain Lead
flame retardant pc boards can contain Tetrabromobisphenol A (TBBPA)
Aluminum alloys can contain Chromium
To put it simply we are a small company and do not have the resources to test every single part, so we list every thing as hazardous. Please recycle all electronic parts responsibly and under no circumstance eat, drink or smoke these parts and wash your hands after touching!