Arduino WiFi shield board using industrial-grade, shielded ESP8266 module for ESP - 13 .
Pin-compatible with Arduino UNO, Mega
Arduino Pinout 2/3/4/5/6/7/8/9/10/11/12/13;
ESP8266 GPIO Pinout 0/2/4/5/9/10/12/13/14/15/16 / ADC / EN / * UART TX / UART RX;
Can be used as an stand alone ESP8266 development board.
download the official firmware the AT command, NodeMCU open-source firmware, etc;
Support wireless 802.11 b/g/n standard.
Transmission rate: 110-460800 BPS.
Support the STA/AP two working mode;
Built-in TCP/IP protocol stack, (configurable socket);
Support the standard TCP/UDP Server and Client;
Serial port baud rate support: 1200/2400/4800/9600/19200/38400/57600/74800/ 115200 bps.
Selectable Serial port data bits: 5/6/7/8;
Parity bit: None
Stop bit: 1 or 2;
KEY buttons mode configurationn.
Dual-Ports: DIP switches: select Arduino and ESP8266
Current: ~70 ma (200ma Max), < 200 ua standby. L: 2-3/4" W: 2" HT: 3/4" WT: .06
WARNING: This product can expose you to chemicals including Nickel which is known to the State of California to cause cancer and which is known to the State of California to cause birth defects and/or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Click to see Why is this here?
As of August 2018 the State of California has changed the requirements of the “Prop 65” law. We now must list on our website any possible chemicals the can cause cancer, birth defects or reproductive problem.
As an example:
ABS plastic contains styrene
PVC wire insulation can contain Di(2-ethylhexyl)phthalate (DEHP)
electrolytic capacitors can contain Ethylene glycol
Brass can contain Lead
flame retardant pc boards can contain Tetrabromobisphenol A (TBBPA)
Aluminum alloys can contain Chromium
To put it simply we are a small company and do not have the resources to test every single part, so we list every thing as hazardous. Please recycle all electronic parts responsibly and under no circumstance eat, drink or smoke these parts and wash your hands after touching!