Arduino NANO Terminal Strip Breakout Shield
Terminal strip adapter board for the NANO 3 microcontroller. Allows easy expansion or wiring to sensors, motors etc. Mounting holes for a more permanent installation. L: 2-1/8 W: 1-5/8 H: 1/2 WT: .05
WARNING: This product can expose you to chemicals including Nickel which is known to the State of California to cause cancer and which is known to the State of California to cause birth defects and/or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Click to see Why is this here?
As of August 2018 the State of California has changed the requirements of the Prop 65 law. We now must list on our website any possible chemicals the can cause cancer, birth defects or reproductive problem.
As an example:
ABS plastic contains styrene
PVC wire insulation can contain Di(2-ethylhexyl)phthalate (DEHP)
electrolytic capacitors can contain Ethylene glycol
Brass can contain Lead
flame retardant pc boards can contain Tetrabromobisphenol A (TBBPA)
Aluminum alloys can contain Chromium
To put it simply we are a small company and do not have the resources to test every single part, so we list every thing as hazardous. Please recycle all electronic parts responsibly and under no circumstance eat, drink or smoke these parts and wash your hands after touching!
First of all, its very useful because you can take a Nano and wire and re-wire all day. I didnt have to deal with design issues I often encounter on a lot of devices. Each pin is clearly marked. The mounting holes are well-spaced and you dont need a special small-head screw to mount this. The USB connector is easy to access from one side. Screw blocks are easy enough to insert/remove wires and screwdriver. No odd parts to easily short out. It doesnt take up more space then it needs to. Lacking any negatives, this makes this thing pretty good and useful. Worth the 5 bucks!