Plastic body , Chassis mount power connector. Designed for 5.5/2.1 mm plugs. Aux. contact connected to sleeve with no plug inserted. Solder terminals. L: 7/8" Mtg. Hole: 5/16" Dia.: 15/32" WT: .007
WARNING: This product can expose you to chemicals including Nickel which is known to the State of California to cause cancer and which is known to the State of California to cause birth defects and/or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Click to see Why is this here?
As of August 2018 the State of California has changed the requirements of the “Prop 65” law. We now must list on our website any possible chemicals the can cause cancer, birth defects or reproductive problem.
As an example:
ABS plastic contains styrene
PVC wire insulation can contain Di(2-ethylhexyl)phthalate (DEHP)
electrolytic capacitors can contain Ethylene glycol
Brass can contain Lead
flame retardant pc boards can contain Tetrabromobisphenol A (TBBPA)
Aluminum alloys can contain Chromium
To put it simply we are a small company and do not have the resources to test every single part, so we list every thing as hazardous. Please recycle all electronic parts responsibly and under no circumstance eat, drink or smoke these parts and wash your hands after touching!
This is a low profile connector, perfect for small electronic cases. Compared to similar product from DigiKey, this one fits on the end panel of our handheld box but the only Digikey 2.1 mm connector that is similar is too big.
It Looked Good, But...
Weve used MPJA many times before and always been more than satisfied with their products. However, the connector we received was assembled with the middle pin so far off center it would not even accept the mating plug. Totally useless and not worth the hassle to return it.