MG Chemicals Wood Filament 0.5kg. Spool is made with a blend of polylactic acid (PLA) and wood particles. Material can be sanded, painted. and smells like wood. It is used similar to PLA and is great for artists and hobbyists who are looking to experiment with different printing materials.
Size: 1.75mm
Material: ~75-80% PLA/ ~20-25% Poplar wood dust
Printing temperature: 185° - 230° C (365°- 446° F).
Varying Temperatures will affect the color
No heated bed is required.
Nozzle: Recommend 0.4 mm larger to avoid clogging.
NOTE: Avoid letting the filament sit in the hot nozzle for any length of time while it is hot, this tends to cause clogging.
The wood fibers collect at the tip when idle.
Once started; it is best to keep printing.
If you stop to do adjustments etc; either remove the filament from the hot end or let it cool down till you are ready to start printing again. These extra few steps will save you time.
DIA: 1.75mm Ship Weight: 1.7
