36VDC 1.12A IP64 Rated Meanwell LED Supply with Dimming
MFG: MEANWELL P/N: HLN-40H-36AB Input: 100-240 VAC 50/60Hz (277VAC US Only) Output: 36VDC @ 1.25A Adjustable (33-40V)(.67-1.12A)
IP64 rated, for Dry & Damp locations NOT WET.
Suitable for LED lighting with Dimming
Dimming: 10%min -100%max Brightness
3 Modes: 1-10V/PWM (Freq: 100-3KHz)/Resistance 10K-100K)
Power Factor corrected, Over Voltage & Current protected. Class 2, Double insulated. 0.5% Line/Load regulation.
Max. Ripple/Noise: 200mVp-p
12in. Wire leads
UL/us/canada Listed. RoHS Compliant L: 6-1/4" W: 2-3/8" H: 1-3/8" WT: .9
WARNING: This product can expose you to chemicals including Nickel which is known to the State of California to cause cancer and which is known to the State of California to cause birth defects and/or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Click to see Why is this here?
As of August 2018 the State of California has changed the requirements of the “Prop 65” law. We now must list on our website any possible chemicals the can cause cancer, birth defects or reproductive problem.
As an example:
ABS plastic contains styrene
PVC wire insulation can contain Di(2-ethylhexyl)phthalate (DEHP)
electrolytic capacitors can contain Ethylene glycol
Brass can contain Lead
flame retardant pc boards can contain Tetrabromobisphenol A (TBBPA)
Aluminum alloys can contain Chromium
To put it simply we are a small company and do not have the resources to test every single part, so we list every thing as hazardous. Please recycle all electronic parts responsibly and under no circumstance eat, drink or smoke these parts and wash your hands after touching!
Very nice, totally enclosed power supply for 3 identical 12V LED strips in series. Designed exclusively for 36V applications with limited adjustment range. You can dial the voltage down [via a screwdriver-adjusted trimpot under a rubber plug] to as low as 32V for power-saving up to 44V to compensate for wiring resistance. If your LEDs lack current limiting series resistors there is a current-limit adjustment under a second rubber cover but it too is rather limited in range [about 0.6A to the nameplate rating of 1.12A]. I havent tried the dimming feature but it is very versatile allowing a simple remote rheostat, control voltage, or micro controller-friendly logic-level PWM signal to control brightness from 10% to 100%. The separate AC and DC/Dimming cables are power-cord grade with #18 wires.