Three-axis digital output gyroscope for Microcontrollers
Designed with the STMicroelectronics L3G4200D triple axis accelerometer/Gyro.
Power: 2.4 V to 3.6 V
Scale: 250/500/2000deg/Sec. (dps) (Selectable)
Output: I2C or 3/4 wire SPI (Selectable)
I/O: 1.8V Low voltage-compatible
16 bit-rate value data output
Temperature sensor (8-bit data output)
Two digital output lines (interrupt and data ready)
Low and high-pass filters with selectable bandwidth
Ultra-stable over temperature and time
Embedded power-down and sleep mode
FIFO: 32-slot, 16-bit data X 3 (yaw, pitch, and roll)
LED Power Indicator
Connections: 2 X 4 Pin, 0.1 Pitch headers. SQ: 1-1/16 W: 9/16 H: 1/2 O/A WT: .008
WARNING: This product can expose you to chemicals including Nickel which is known to the State of California to cause cancer and which is known to the State of California to cause birth defects and/or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Click to see Why is this here?
As of August 2018 the State of California has changed the requirements of the Prop 65 law. We now must list on our website any possible chemicals the can cause cancer, birth defects or reproductive problem.
As an example:
ABS plastic contains styrene
PVC wire insulation can contain Di(2-ethylhexyl)phthalate (DEHP)
electrolytic capacitors can contain Ethylene glycol
Brass can contain Lead
flame retardant pc boards can contain Tetrabromobisphenol A (TBBPA)
Aluminum alloys can contain Chromium
To put it simply we are a small company and do not have the resources to test every single part, so we list every thing as hazardous. Please recycle all electronic parts responsibly and under no circumstance eat, drink or smoke these parts and wash your hands after touching!