2.8" TFT LCD Graphics Module & Stylus for Micro-controllers.
8 or16 bit parallel interface (Solder Bridge Select).
Uses ILI9341 LCD Interface/driver and XPT2046 touch screen driver.
On-board mini SD card expansion connector.
Supports STM32 and C51 platforms.
Direct plug-in use with ALIENTEK STM32 Mini, Elite, WarShip, Explorer, and Apollo development boards. NOT RECOMMENDED FOR ARDUINO PI & CLONES
Power: +3.3/5 VDC (On-Board Regulator)
Display Type: 2.8 “TFT” color LCD
Resolution: 240 x 320 RGB pixels
Display mode: Transmissive
Backlight: 4 x White LED
Viewing Angle: 12 O’clock
Operating Temp: -20 ° C ~ + 60 ° C
Storage Temp: -30 ° C ~ + 70 ° C
Connections: 2 x17 Pin 0.1" Pitch male header L: 3-1/4" W: 2" T: 3/8" Board WT: .5
WARNING: This product can expose you to chemicals including Nickel which is known to the State of California to cause cancer and which is known to the State of California to cause birth defects and/or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Click to see Why is this here?
As of August 2018 the State of California has changed the requirements of the “Prop 65” law. We now must list on our website any possible chemicals the can cause cancer, birth defects or reproductive problem.
As an example:
ABS plastic contains styrene
PVC wire insulation can contain Di(2-ethylhexyl)phthalate (DEHP)
electrolytic capacitors can contain Ethylene glycol
Brass can contain Lead
flame retardant pc boards can contain Tetrabromobisphenol A (TBBPA)
Aluminum alloys can contain Chromium
To put it simply we are a small company and do not have the resources to test every single part, so we list every thing as hazardous. Please recycle all electronic parts responsibly and under no circumstance eat, drink or smoke these parts and wash your hands after touching!