Rectifier type AC panel meter. Accuracy rated 2-1/2%. Black legends on white face with red tip pointer. Plastic case with "zero" adjustment. Front mounts in a 55 X 60mm Cutout. Two mounting screws. W: 2-1/2" H: 2-3/16" D: 2-3/8" O/A WT: .16
WARNING: This product can expose you to chemicals including Nickel which is known to the State of California to cause cancer and which is known to the State of California to cause birth defects and/or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Click to see Why is this here?
As of August 2018 the State of California has changed the requirements of the “Prop 65” law. We now must list on our website any possible chemicals the can cause cancer, birth defects or reproductive problem.
As an example:
ABS plastic contains styrene
PVC wire insulation can contain Di(2-ethylhexyl)phthalate (DEHP)
electrolytic capacitors can contain Ethylene glycol
Brass can contain Lead
flame retardant pc boards can contain Tetrabromobisphenol A (TBBPA)
Aluminum alloys can contain Chromium
To put it simply we are a small company and do not have the resources to test every single part, so we list every thing as hazardous. Please recycle all electronic parts responsibly and under no circumstance eat, drink or smoke these parts and wash your hands after touching!
OK, so I have never had a hobby use for a panel voltmeter before, so I was not sure what I would get. These units are 100% plastic and I am having to mount them in an ad-hoc way because I dont have a control panel. That being said they do exactly what they are supposed to do, and the mounting hardware is as good as stuff I have worked with on the job. The plastic seems to be sturdy enough to endure the mounting operation and they look like they will last at least a few years from a mechanical perspective. I am not sure how accurate they are, but for a device that just measures a tenth of a volt between 0 and 5 volts I have not caught them in a gross deviation from my cheap DVM.