12V, +-.5V DC input Only.
20module string of 72 Lumens/Module White LED light engines featuring: 4 high lumen LEDs/module. 120 deg. beam angle.
Current: 1.6A (80mA)/module) Color Temp:~5000 to 6500
Steel case, Peel-n-stick backer, clear epoxy potting. CE /RoHS Module L.: 1-7/16 W: 1-3/4 T: 3/16" L.: 115 WT: .44
WARNING: This product can expose you to chemicals including arsenic which is known to the State of California to cause cancer and which is known to the State of California to cause birth defects and/or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Click to see Why is this here?
As of August 2018 the State of California has changed the requirements of the Prop 65 law. We now must list on our website any possible chemicals the can cause cancer, birth defects or reproductive problem.
As an example:
ABS plastic contains styrene
PVC wire insulation can contain Di(2-ethylhexyl)phthalate (DEHP)
electrolytic capacitors can contain Ethylene glycol
Brass can contain Lead
flame retardant pc boards can contain Tetrabromobisphenol A (TBBPA)
Aluminum alloys can contain Chromium
To put it simply we are a small company and do not have the resources to test every single part, so we list every thing as hazardous. Please recycle all electronic parts responsibly and under no circumstance eat, drink or smoke these parts and wash your hands after touching!
There is a conflict between the ad which says the total length is 115 inches and the spec sheet which says the length is 2020 mm which is 80 inches. The picture makes it seem much shorter than either number. BTW, a better picture would be to show it next to a ruler or other object.
- Dean, CT
I love these so much I generally keep 2 or 3 twenty packs laying around. Only problem I have is the sticky backer sometimes sucks. But it has screw holes so all is good.
RV Re-fit as well as under the hood of my truck
I have purchased about 100 of these. I changed all my older bulb style RV running lights with these squares. They fit under the lenses fine. I also mounted 2 of the sqaures under the hoods of my 3 pickups. No more looking for the dip stick or trans fluid stick when its dark. And as one other individual wrote, I mounted 5 on each under side of the railing on my 24 foot auto transport trailer. Can see the tires when on the road and NO ONE misses my trailer on the road. Lastly, the wife had me mount these under the roof eve around the house. They draw very little power and make a great night light around the property, and since they are sealed in a clear acrylic coating, water is NOT an issue. Love em....
- Mike Studer, AL
Great Value --- Very Bright
I gambled on this purchase since I had never seen these. I wanted to retrofit a magnifying lamp from circular florescent to LED. This was just the thing! I used only 4 of the pucks for that project and the rest will go in my cargo trailer.
I will be cutting them apart and spreading them over the 16 foot length. I like using the multiple units because they will more evenly disperse the light and they dont need a heat sink like higher wattage units would require.
I think these might also be great for replacing neon light tubes in an illuminated sign.
Ive been a customer of MPJA since they had only catalog ordering from the back of Popular Electronics magazine.