1-800-652-6733
Find us on Facebook View our Youtube Channel View us on Instagram Follow us on Twitter
Shopping Cart
0 Items
Total: $0.00
Shopping Cart | Login

176 x 220 RGB Pixels 2" TFT LCD for Microcontrollers

176 x 220 RGB Pixels 2

35627-large.jpg  35627-1.jpg    California Proposition 65 Warning
Stock No: 35627 MP
 Review Average:  
 Number of Reviews: 2
 View ReviewsReview this item
$8.95


Availibilty: In Stock   Units: 48
Quantity 


SHARE
   Share   
Email this to a friend   

 Detailed Description
View PDF Data Sheet

View PDF Data Sheet

View PDF Data Sheet


2" TFT LCD Graphics Module for Micro-controllers.
Uses ILI9225 IC with SPI serial interface
Compatible with 51/ARM/Arduino/ Raspberry-Pi.
Can be plugged into Arduino Mega2560 or Uno R3
directly without wire connections. On-board voltage regulator.
Integrated backlight circuit which controls the
backlight and can use the PMW of the arduino to adjust the
backlight brightness.
On-board mini SD card expansion connector.
Power: +3.3/5 VDC (On-Board Regulator)
Display Type: 2.0 “TFT”
Resolution: 176 x 220 RGB pixels
Display mode: Transmissive
Backlight: White LED
Viewing Angle: 12 O’clock
Operating Temp: -20 ° C ~ + 70 ° C
Storage Temp: -30 ° C ~ + 80 ° C
Outline Dimensions: 37.68 * 51.3 * 2.3 mm
L: 2-1/2” W: 1-1/2” T: 1/2” O/A WT: .03

California Proposition 65 Warning WARNING: This product can expose you to chemicals including Nickel which is known to the State of California to cause cancer and which is known to the State of California to cause birth defects and/or other reproductive harm. For more information, go to www.P65Warnings.ca.gov


 Product ReviewsClick here to review this item
Beautiful Color Graphics
This board plugs right into the Arduino without the need for wires. It great for plotting geometric shapes. Here is a sketch that draws sine waves. -- // #include SPI.h #include TFT_22_ILI9225.h #include math.h #define TFT_RST A4 #define TFT_RS A3 #define TFT_CS A5 // SS #define TFT_SDI A2 // MOSI #define TFT_CLK A1 // SCK #define TFT_LED 0 // 0 if wired to +5V directly #define TFT_BRIGHTNESS 200 // Initial brightness of TFT backlight optional #define ILI9225_LCD_WIDTH 176 #define ILI9225_LCD_HEIGHT 220 TFT_22_ILI9225 tft = TFT_22_ILI9225TFT_RST, TFT_RS, TFT_CS, TFT_SDI, TFT_CLK, TFT_LED; void setup { tft.begin; tft.clear; } void loop { pixel_loopx0x07FF; // cyan pixel_loopy0x07E0; // green pixel_loopx0x0000; // black pixel_loopy0x0000; // black } void pixel_loopxlong s { for int y = 0; y <= ILI9225_LCD_HEIGHT; y = y + 1 { int x = siny * 5 * DEG_TO_RAD * ILI9225_LCD_WIDTH / 2 + ILI9225_LCD_WIDTH / 2; tft.drawPixelx, y, s; delayrandom2, 50; } } void pixel_loopylong s { for int x = 0; x <= ILI9225_LCD_WIDTH; x = x + 1 { int y = sinx * 5 * DEG_TO_RAD * ILI9225_LCD_HEIGHT / 2 + ILI9225_LCD_HEIGHT / 2; tft.drawPixelx, y, s; delayrandom2, 50; } }
- Tom Freer, OH
 
Nice, Compact and easy to use
I picked this display over its larger cousin sold by MPJA because I have to fit it in a tight space. The exact dimensions of the display -not the board- is 2 X 1.5. The display sticks up from the board about 1/8 and could fit through a panel cut out. After running for some time, it is possible to feel a slight warmth, but less than body temperature. Once I hooked up the 6 control lines and two power lines to the arduino nano, everything just worked. I ran all three sample programs with no problem. You cannot just plug it in to the nano and expect it to work like the Mega2560. You can plug it into the Mega, but youll need to change the interface pins in the software to make it use the analog pins instead of the digital ones. For the Nano, connect CLK to D13, SDA to D11, RS to D9, RST to D8, and CS to D10. The display only uses the SPI MOSI pin and the MISO pin -D12- is not used. The fonts included are bitmapped, but if you use the Mega, you can use the TrueType font clones. The Nano doesnt have enough FLASH memory for those. Lastly, the Sine wave program in the photo is not included in the sample programs. Would be nice if MPJA provided that one.
- Dennis, FL
 




QUICK LINKS
Power Supplies
Benchtop Power Supplies
Solder Stations
12 Volt Power Supply
Solderless Breadboards
Digital Multimeters
Digital Panel Meters
DC Axial Brushless Fans
IEC Power Cords
 
Arduino Compatible Boards
Electronic Enclosures and Boxes
Stepper Motors and Drivers
24 Volt Power Supply
Adapter Power Supplies
Sub-Mini Toggle Switches
Mini Toggle Switches
Heat Shrink Tubing
Power Transformers
MY ACCOUNT
Login/Register
View Orders
Update Profile
View Cart
View Wish List
RESOURCES
Support Files
Information Articles
"How To" Videos
FREE Catalog
Email Signup
COMPANY INFO.
Ordering Info.
Shipping Info.
Privacy Statement
Contact Us
Directions to our Store
Find us on Facebook View our Youtube Channel View us on Instagram Follow us on Twitter

Copyright © 1997-2021 MPJA.com - All Rights Reserved
Send mail to MPJA.com with questions or comments about this web site.
Site Designed by NiteOwl Computing