REQUIRES HEATSINKING & CURRENT LIMITING (Case Temp. <45C max)
Super Bright, Cool White LEDs.
Color Temperature: 6000-6500 Color Temperature
Max. Reverse Voltage 50V.
View Angle: 160deg.
Forward Voltage Drop: 32-34 VDC
Forward Current: 700mA max.
ALUMINUM BASE SURFACE MOUNT PACKAGE Dia: 57mm H: 4.5mm WT: .027
WARNING: This product can expose you to chemicals including Chromium which is known to the State of California to cause cancer and which is known to the State of California to cause birth defects and/or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Click to see Why is this here?
As of August 2018 the State of California has changed the requirements of the “Prop 65” law. We now must list on our website any possible chemicals the can cause cancer, birth defects or reproductive problem.
As an example:
ABS plastic contains styrene
PVC wire insulation can contain Di(2-ethylhexyl)phthalate (DEHP)
electrolytic capacitors can contain Ethylene glycol
Brass can contain Lead
flame retardant pc boards can contain Tetrabromobisphenol A (TBBPA)
Aluminum alloys can contain Chromium
To put it simply we are a small company and do not have the resources to test every single part, so we list every thing as hazardous. Please recycle all electronic parts responsibly and under no circumstance eat, drink or smoke these parts and wash your hands after touching!
Used for a portable shop flood light. Was easy to solder and worked great. Very bright. Way better than a hot halogen bulb! I used it often, hundreds of hours over 15 months, but then it stopped working flashing after 10 minutes of use.
- Tom, NH
20W LEDs polarity
Watch out for the polarity markings on these.
White -on-white, hard to see.
Ambigously postioned relative to solder lugs.
I hooked first two up rev polarity-no harm.
Lots of light+lots of heat sinking needed.