WARNING: This product can expose you to chemicals including Nickel which is known to the State of California to cause cancer and which is known to the State of California to cause birth defects and/or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Click to see Why is this here? As of August 2018 the State of California has changed the requirements of the “Prop 65” law. We now must list on our website any possible chemicals the can cause cancer, birth defects or reproductive problem.
As an example:
ABS plastic contains styrene
PVC wire insulation can contain Di(2-ethylhexyl)phthalate (DEHP)
electrolytic capacitors can contain Ethylene glycol
Brass can contain Lead
flame retardant pc boards can contain Tetrabromobisphenol A (TBBPA)
Aluminum alloys can contain Chromium
To put it simply we are a small company and do not have the resources to test every single part, so we list every thing as hazardous. Please recycle all electronic parts responsibly and under no circumstance eat, drink or smoke these parts and wash your hands after touching!
|Product ReviewsClick here to review this item|
|Works well, small caveat.|
|Dont expect this transformer to provide enough voltage for a 13.8V regulated power supply at 8 amps! It wasnt intended for that. The rectified, filtered, unloaded voltage is about 16V. That drops to 13.6V at about 2 amps, and down to about 12v at 8 amps. It is rated 12V at 8 amps, and that is what it does, and does it well. I built a supply and used an FET in a low-dropout regulator circuit to get 13.2 volts at up to about 2 amps. I am happy with it, as it did meet my expectations for a very clean, regulated, linear supply to power an SDR system.|
|- Willie, CT|
©2023 Company. All Rights Reserved.