We do not include any printed materials of the following "Data Sheets". You will need to print from the following Document(s).
16 SPDT Relay Module for Arduino and other Microcontrollers
16 independent optocoupled SPDT Relays designed to be driven by an Arduino or other micro controllers.
Low on input pin activates Relay
LED status indicator for each relay
Power: 12VDC from external Power Supply
On Board LM2576 Based 12V to 5VDC Power supply
Logic Gnd.from Microcontroller (Common with Relay Power Gnd)
Logic Input: 2 X 10, 0.1in. Pitch header with Vcc, (from On-board supply)
Gnd, and an input pin for each relay. Connect Input pin and Gnd. to microcontroller
Relay: 12VDC coil
Contacts: SPDT 10A @ 30VDC, 250VAC
Output: Terminal strip for contacts
4 corner mounting holes. L: 7" W: 3-1/8" H: 7/8" WT: .6
WARNING: This product can expose you to chemicals including Nickel which is known to the State of California to cause cancer and which is known to the State of California to cause birth defects and/or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Click to see Why is this here?
As of August 2018 the State of California has changed the requirements of the “Prop 65” law. We now must list on our website any possible chemicals the can cause cancer, birth defects or reproductive problem.
As an example:
ABS plastic contains styrene
PVC wire insulation can contain Di(2-ethylhexyl)phthalate (DEHP)
electrolytic capacitors can contain Ethylene glycol
Brass can contain Lead
flame retardant pc boards can contain Tetrabromobisphenol A (TBBPA)
Aluminum alloys can contain Chromium
To put it simply we are a small company and do not have the resources to test every single part, so we list every thing as hazardous. Please recycle all electronic parts responsibly and under no circumstance eat, drink or smoke these parts and wash your hands after touching!