MFG: ENG for CISCO P/N: 3A-122DU12 Input: 100-120 VAC 50-60Hz Output: 12VDC @ 1A Specifications/Features: Removed From New Equipment
Unregulated, switching adapter supply. 24in. Non-Polarized 2 blade attached Input cord. 6ft output cord with 10mm X 5.5/2.1mm ID coaxial plug Center +. UL/canada/usa listed. L: 3 W: 1-7/8 T: 1 WT: .3
WARNING: This product can expose you to chemicals including Nickel which is known to the State of California to cause cancer and which is known to the State of California to cause birth defects and/or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Click to see Why is this here?
As of August 2018 the State of California has changed the requirements of the Prop 65 law. We now must list on our website any possible chemicals the can cause cancer, birth defects or reproductive problem.
As an example:
ABS plastic contains styrene
PVC wire insulation can contain Di(2-ethylhexyl)phthalate (DEHP)
electrolytic capacitors can contain Ethylene glycol
Brass can contain Lead
flame retardant pc boards can contain Tetrabromobisphenol A (TBBPA)
Aluminum alloys can contain Chromium
To put it simply we are a small company and do not have the resources to test every single part, so we list every thing as hazardous. Please recycle all electronic parts responsibly and under no circumstance eat, drink or smoke these parts and wash your hands after touching!
Although unregulated, regulation is better than your old-style transformer-rectifier adapter. I measured 14.1V no load, 12.9V with 0.04A load, 12.5 at 0.12A, and dead-on 12V with a 1 amp load. There does not seem to be any line voltage regulation so these numbers taken at 125V will scale with your local line voltage. Caution: there is no short circuit protection at all, even for very brief shorts.
- HAL, TX
Bought this to revive an old PDA, it works like new now.