Microwave / Radar Motion Sensor Module, 5V

DATA SHEET

Compact, Microwave motion detector operates at 5.8GHz offers high stability and strong anti-interference to minimize interferece with others.
Input: 5VDC (Regulated +- 0.3V) @ > 40mA
Frequency: 5.8GHz. ISM Band
Output: 5V Logic signal (Output goes high when triggered)
Output Pulse Width; 2-120Sec. (Factory Default:2sec.)
Output Active LED
Sensing Distance: 0.5-12M Adjustable
Sensing Angle: 360Deg. Frontal Cone
Mounting Height: 2-6M depending on Area (Centered is Best)
Connections: Solder Holes
Vcc: +5VDC
OUT: Output
GND: Common (Output is referenced to Gnd)
Operation:At initial power-on module will output a high level, after 2 seconds, it will change to a low level, then there will be 8 seconds of self-testing, during which no external signal will be accepted, after the 8 seconds module will be in the normal operating mode.
L: 40mm W: 22mm H: 11mm WT: .02

WARNING: This product can expose you to chemicals including Nickel which is known to the State of California to cause cancer and which is known to the State of California to cause birth defects and/or other reproductive harm. For more information, go to www.P65Warnings.ca.gov Click to see Why is this here? As of August 2018 the State of California has changed the requirements of the “Prop 65” law. We now must list on our website any possible chemicals the can cause cancer, birth defects or reproductive problem. As an example:    ABS plastic contains styrene    PVC wire insulation can contain Di(2-ethylhexyl)phthalate (DEHP)    electrolytic capacitors can contain Ethylene glycol    Brass can contain Lead    flame retardant pc boards can contain Tetrabromobisphenol A (TBBPA)    Aluminum alloys can contain Chromium To put it simply we are a small company and do not have the resources to test every single part, so we list every thing as hazardous. Please recycle all electronic parts responsibly and under no circumstance eat, drink or smoke these parts and wash your hands after touching!