0-100VDC 4 Digit Red LED Panel Meter 3 Lead Snap-in

Mini snap-in, 3 wire, 4 digit LED panel Voltmeter. Ideal for monitoring in battery, solar and control circuits.
Operating Voltage: 5-30VDC (12V Nom)
Measurement Voltage Range: Auto 0 to +100.0V
(No - readings)
NOTE: Requires Separate power Supply if Input will exceed 30VDC.
(Common Input & Power: Measurement Range: 5-30V)
Accuracy: 0.3% +- 2LSD
Refresh Rate: 3/Sec
Character Height: 0.56in.Mini 4 Digit LED
Connections:
Red Lead: Meter Power Input + Positive
Black Lead: Meter Power & Measurement Input - Negative (Common)
Yellow Lead: Measurement Input + Positive
6in Pigtail Leads
Cutout: 57.8mm x 26mm
W: 60mm (2-3/8") H: 29mm (1-1/8") D: 23mm (3/4") WT: .04

WARNING: This product can expose you to chemicals including Nickel which is known to the State of California to cause cancer and which is known to the State of California to cause birth defects and/or other reproductive harm. For more information, go to www.P65Warnings.ca.gov Click to see Why is this here? As of August 2018 the State of California has changed the requirements of the “Prop 65” law. We now must list on our website any possible chemicals the can cause cancer, birth defects or reproductive problem. As an example:    ABS plastic contains styrene    PVC wire insulation can contain Di(2-ethylhexyl)phthalate (DEHP)    electrolytic capacitors can contain Ethylene glycol    Brass can contain Lead    flame retardant pc boards can contain Tetrabromobisphenol A (TBBPA)    Aluminum alloys can contain Chromium To put it simply we are a small company and do not have the resources to test every single part, so we list every thing as hazardous. Please recycle all electronic parts responsibly and under no circumstance eat, drink or smoke these parts and wash your hands after touching!