100pcs Solder Seal Heat Shrink Sleeves
Solder-Shrink terminals for splicing & waterproofing wires.
Solder & seal in one operation. Pre-fluxed Low Melting solder preforms. Color coded, Polyolefin tubing with hot melt adhesive/sealant inside.
For use in marine and automobile applications
Operating Temp: -55°C~ 125°C
Minimum Shrink Temperature: 60°C
Solder Melt Start Temp: ~ 138°C
Full Melt Temp: 160°C
25pcs White: Diameter 1.5 mm, for 26-24AWG
35pcs Red: Diameter 3.0 mm, for 22-18AWG
30pcs Blue: Diameter 5.0mm for 16-14AWG
10pcs Yellow: Diameter 6.0 mm for 12-10AWG
Plastic Box with latching Lid L: 6" W: 2-3/4" T: 1-1/8" WT: .2
WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP) which is known to the State of California to cause cancer and which is known to the State of California to cause birth defects and/or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Click to see Why is this here?
As of August 2018 the State of California has changed the requirements of the “Prop 65” law. We now must list on our website any possible chemicals the can cause cancer, birth defects or reproductive problem.
As an example:
ABS plastic contains styrene
PVC wire insulation can contain Di(2-ethylhexyl)phthalate (DEHP)
electrolytic capacitors can contain Ethylene glycol
Brass can contain Lead
flame retardant pc boards can contain Tetrabromobisphenol A (TBBPA)
Aluminum alloys can contain Chromium
To put it simply we are a small company and do not have the resources to test every single part, so we list every thing as hazardous. Please recycle all electronic parts responsibly and under no circumstance eat, drink or smoke these parts and wash your hands after touching!