5gm. Tube of Thermally Conductive Adhesive

Single component, room temperature, moisture cure silicone with good thermal conductivity, wide operating temperature range.
5gm tube of Thermal conductive white paste adhesive for attaching components, Transistors, LEDs etc.to heat dissipation surfaces.
Thermal Conductivity: >0.671W/mk;
Breaking Strength: 1.5MPA
Cure Time: ~10min @ 25�C
Operating Temperature Range: -60 to ~200�C)
Short Term Temperature Spikes to 300�C
NOTE: For longest life, After opening:
Clean Tube Opening and firmly replace cap and place in a sealing bag, Remove Air from bag.
L: 2-1/4" Tube WT: .02

WARNING: This product can expose you to chemicals including Nickel which is known to the State of California to cause cancer and which is known to the State of California to cause birth defects and/or other reproductive harm. For more information, go to www.P65Warnings.ca.gov Click to see Why is this here? As of August 2018 the State of California has changed the requirements of the “Prop 65” law. We now must list on our website any possible chemicals the can cause cancer, birth defects or reproductive problem. As an example:    ABS plastic contains styrene    PVC wire insulation can contain Di(2-ethylhexyl)phthalate (DEHP)    electrolytic capacitors can contain Ethylene glycol    Brass can contain Lead    flame retardant pc boards can contain Tetrabromobisphenol A (TBBPA)    Aluminum alloys can contain Chromium To put it simply we are a small company and do not have the resources to test every single part, so we list every thing as hazardous. Please recycle all electronic parts responsibly and under no circumstance eat, drink or smoke these parts and wash your hands after touching!